Jump to content

Huge sculptures in spectacular places - How?

Rate this topic


lonvig
 Share

Recommended Posts

A member of a council of commerce asked me to design a motif for plastic bags.

The intention was do promote the city.

To visualize the city.

At the same time a major motor way was under construction.

A motor way that passed by this city.

I told the member of the council of commerce that it might be a better idea to erect a huge metal sculpture close to the new motor way.

Sure it would be a much more expensive solution than the plastic bags.

I would never suggest this to the council of commerce.

But.

You yourself can have 15 minutes to tell the council about the idea at the next council meeting, the council of commerce member said.

I told the council about my idea.

artblog-24-ravn-visuel.jpgartblog-24-draft.jpg

I had done a photo of the spectacular place where the sculpture was supposed to be erected.

I had made a tiny draft.

I showed a large computer image with the sculpture already erected.

I showed the tiny draft.

The sculpture was 75 feet high.

The diameter of the sculpture tubes were 21".

I told the council that 40,000 people passed by this spectacular place every day.

I told about my inspiration - and what the sculpture might symbolize.

And so on.

And so on.

I talked and talked for 15 minutes.

After 15 minutes the chairman of the council said,

We must erect this sculpture.

What's the price?

Usually potential customers do not mention these two sentences i the above order.

Usually the first sentence after a presentation of an idea is "what's the price".

Well, OK.

Peace of cake.

artblog-24-forklift.jpgI started my forklift.

I found some tubes in my backyard.

artblog-24-studio.jpgI went to my studio

and welded the sculpture.

artblog-24-lorry.jpg I brought the sculpture

to the spectacular place

on my lorry.

artblog-24-hh.jpgI got a brush and two bottles

of paint.

One with red paint

and one with blue.

And.

Here you are!!!

"2H"

But.

It is not that easy.

Don't believe this.

The council of commerce story is true.

But it is far more complicated and demanding to build a huge metal sculpture.

Presentation

Huge metal sculptures are expensive.

Therefore it is of the greatest importance that you can present the sculpture in an image

exactly as it will be seen in reality.

At the exact spot seen from the exact angle.

You must photograph the spectacular place.

You must do a draft of the sculpture and put it into that photo.

Here a computer is indispensable.

This is the key activity in the whole project.

If this part is not done in a proper way there is no project.

PermissionsFirst of all you must have permissions from a lot of authorities.

The Road Directorate

The County Council

The Nature Conservancy

The Municipality Council

The Police

Etc.

This is of course dependent on in which country you want to built a huge metal sculpture.

In Chicago I once suggested a huge metal sculpture in Lake Michigan and we had to add

Civil Aviation authorities and the Military.

Calculations

It is important to consider building of a huge metal sculpture as an ordinary building project.

It is important to do the ordinary engineer calculations concerning the construction.

Of course the construction must be able to resist any storm and any hurricane.

Of course the construction must be able to resist any fall of rain, snow etc.

Of course the construction must be able to endure temperature fluctuations.

The construction must resist any force of wind.

Sounds obvious.

What is not obvious is that a wind force 1 might be dangerous to the construction - but a wind force 10 would not.

That's because high constructions might rotate at low wind forces.

This rotation can harm and destroy seemingly strong constructions.

Therefore the most important engineer calculation is concerning rotation.

It might be necessary to place some kind of stabilizer equipment in the top of the sculpture.

In the top of the "2H" sculpture there are oil bath stabilizers in both sculptures.

Construction

Don't be the entrepreneur yourself.

Sign a contract with one, one company to coordinate and to be responsible for all that has to be done.

Such as calculations, welding, painting, piling, concreting of base, erecting etc.

Painting

Don't paint yourself.

A construction like this is painted by an industrial painter, who can handle large subjects and lives up to

high quality standards. Then you can decide how often you want to dismount the sculpture for repaint.

20 years?

Projects right now

artblog-24-yding.jpgThis draft is made for a tiny city called Yding.

42 feet high and a diameter of 21".

The sculpture has been shown exactly as it

will be seen in reality.

Presentation ended in a decision to proceed.

One company to coordinate and to be responsible

for all that has to be done has been pointed out...

Suggestions

artblog-24-rome-septimus-severus-painting.jpgFirst I went for a walk in Forum Romanum.

Then I did the painting Septimus Severus.

Inspired by the Arch of Septimus Severus

erected A.D. 203 in Forum Romanum.

It was granted the World of Art Award 2006.

artblog-24-rome-septimus-severus-draft.jpg

Then I did this draft.

A draft of relatively thin red

and blue tubes forming

a huge sculpture.

artblog-24-rome-septimus-severus.jpgOn a trip back from Napoli to Rome I did this photo through the front screen of the bus driving on the motor way at the entrance to Rome. Sorry for the toned windows in the bus.

The draft and this photo participated in the competition JUXTAPOSITION 2006 at Artrom Gallery in Rome this February. The sculpture is called "Entrance to Rome" and is supposed to be erected as a south and a north portal of E45, which is the number of the main motor way in Europe - connecting my home in Denmark in Northern Europe with Colosseum in Rome, Italy - and more of course.

David Genovesi Artrom Gallery, Rome:

"Your E45 Entrance to Rome proposal is great.

We know some people in high places, and we know some people who know people in high places. We even know some people who know people who know people in high places. We showed the image to a few and asked them for some direction as to who to send the proposal to.

We are awaiting their reply. So much money is given away for stupid reasons. I think yours has merit."

Other suggestions

artblog-24-toronto.jpgartblog-24-dsb-fredericia.jpgartblog-24-rome-nuvona.jpgartblog-24-horsens-inlet.jpg

Above are:

Sailing T in Lake Ontario, Toronto, Canada

Keep up the steam, Fredericia Railroad Station, Fredericia, Denmark

Sky of Navona, Piazza Navona, Rome, Italy

A Figment of the Imagination, Horsens Inlet, Horsens, Denmark

"T" stands of course for Toronto,

depending on the direction of the wind the sculpture has an indefinite number of "looks".

Keep up the steam is an oversized train or ferry chimney with the Danish Railroads (DSB) logo on it. This sculpture participated in the Artrom Gallery competition JUXTAPOSITION 2006, too. It was shown at The Artrom Gallery JUXTAPOSITION 2006 Winners' Exposition.

Sky of Navona is 4 huge tubes forming a roof over Piazza Navona.

I told the story about Tange Brook from the fairy tale "Farmer Jack". A bottle message dropped from the bridge over Tange Brook, which is a few yards from my house, would end up in New York, in Sidney or on The Galapagos Islands. My sister in law said something like A figment of the Imagination. The sculpture is a few yards from her house.

Highlights

Show the sculpture exactly as it will be seen in reality.

Calculations must be made by an engineer who knows about wind rotations.

Sign a contract with one, one company to coordinate and to be responsible for all that has to be done.

Make sure an industrial painter is hired.

Make the sculpture dismountable.

Have fun.

Photos by:

Martin Ravn, chief photographer at Danish newspaper Horsens Folkeblad, Horsens

Photographer Stephen Downes, Toronto, Ontario, Canada

Asbjorn Lonvig

Probably the best colorful simplicity artist in the world.

Granted the World of Art Award 2006 by World of Art Magazine, London, UK.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...

Important Information

Please check-out the website usage terms at: Pages -> Terms of Service and Use